Gas detectors GM2 – the little life-savers

In an emergency, gas detectors can save lives and property. This is why it is important to choose the right gas detector for your home. The gas detector GM2 is used to monitor rooms in which systems and appliances that use flammable gases such as propane, methane, butane, and acetylene as well as municipal gas and natural gas are operated. Early warnings of gas leaks enable a swift response and help to save lives.

The gas detector GM2 is connected to a TELENOT hazard alarm control panel. This ensures reliable and prompt alerting throughout the building. A remote alarm is also transmitted to a smartphone or a permanently staffed control center.

How do gas detectors work?

A gas leak can lead to the formation of a highly flammable gas-air mixture. In this scenario, just a few flashovers are enough to trigger an explosion. The gas detector GM2 from TELENOT registers the concentration of flammable gases in the air and issues an alarm if the permissible value is exceeded. It sounds an audible signal and a red LED lights up on the gas detector. Since the gas concentration that triggers the alarm is far below the critical concentration for an ignitable mixture, there is sufficient time to react.

Are gas detectors required by law?

Safety first: Even though you are not legally required to install gas detectors in Germany, you should still take advantage of their important functions. Especially in rooms where flammable gases such as propane, methane, butane, municipal gas, or natural gas are used, we urgently recommend installing a gas detector. In the event of a gas leak, you can take prompt action and avoid potential hazards. This also applies to households with a gas connection as improperly installed appliances such as cookers or ovens can present a risk. Don’t delay, secure your home today with a high-quality TELENOT gas detector to guarantee your safety and that of your family. Invest in your protection – it’s worth it.

Which gas detector for natural gas?

If you use natural gas for heating or cooking, you should use a reliable TELENOT gas detector that can detect methane, the primary constituent of natural gas. The natural gas detector should ideally be placed close to the gas source, no more than six meters away, and near the ceiling so that it can detect a possible leak as quickly as possible.

Which gas detector to choose for gas-fired water heaters?

Gas-fired water heaters generally use methane or gaseous mixtures such as municipal gas or natural gas. This is why it is essential to use a gas detector that detects methane.

Where should the TELENOT gas detector be installed?

Mount the gas detector GM2 from TELENOT at a distance of four to six meters from the gas source to optimize the early detection of gas leaks. If heavy liquid gases such as propane and butane are used, the detector should be installed close to the ground. For light gases, such as methane, municipal gas, natural gas, and carbon monoxide, we recommend installation near the ceiling.

What to look for when purchasing a gas detector

Important factors when selecting a gas detector:

• Detection: Make sure that the gas detector detects the relevant gases, irrespective of your area of application. The versatile TELENOT gas detector GM2 detects methane, municipal gas, natural gas, propane, as well as butane and therefore offers optimum protection.
• Volume: To ensure that the alarm signal is clearly audible in an emergency, the built-in warning device should reach a volume of 70 to 85 decibels.
• Power consumption: Pay attention to the power consumption of the gas detector because it is working around the clock. Low power consumption will save energy costs.
• Quality: Invest in high-quality and certified gas detectors, such as the GM2 from TELENOT, which are safe, long-lasting, and offer reliable protection.

What to do in the event of a gas detector alarm?

In the event of a gas detector alarm, proceed as follows:

• Stay calm and don’t panic. Gas detectors can trigger an alarm even at very low gas concentrations. You have plenty of time to get to safety and minimize the danger.
• Open all windows in the room to reduce the gas concentration and the risk of an explosion.
• Close the gas tap to interrupt the gas flow and stop more gas from escaping.
• Avoid using light switches, bells, or other electronic devices, such as televisions or computers. Devices that are already switched on should be left on. Also inform others in the building that they should do the same.
• Exit the building immediately along with everyone else present. Your safety is paramount.
• Call the emergency number (911) and inform the fire department as soon as you and everyone else have safely vacated the building. The fire department will forward the alarm to a specialist service provider that can identify and repair the source of the gas leak.

Follow these instructions to respond appropriately to a gas detector alarm and to guarantee your safety.

False alarms generally only occur very rarely with gas detectors. However, if an alarm turns out to be a false alarm, you do not need to worry about the cost of having the fire department respond. After all, an alarm signal is always a justification for an emergency call – so you don’t need to pay for the emergency call.
 

Other TELENOT hazard detectors

We offer the right hazard detectors for every requirement and application.